पर्यावरण विश्लेषणात्मक रसायन विज्ञान जर्नल

The Effect of Produced Water from Heglig Oil Field on Chemical Additives for Fracturing Fluids

Abstract

Fatima A Elbrir

Produced water is the water produced with oil or gas during well production as a result of different operations. Recently, many Sudanese oil fields suffer from the massive amount of water production; the most water production problems in Sudan were observed in Heglig oilfield. The Heglig oilfield is located in Muglad Basin in the southeast and middle of Block 2 in Sudan. The oil production from Heglig oilfield was reported to have peaked in 2006, however it has been declined now and the water cut was reached 95%. Due to many environmental impacts, several studies were conducted for treating the produced water from Heglig oilfield to be used in irrigation; no work was presented to study the effect of Heglig oilfield produced water on chemical additives for fracturing fluids. However, this work analyzes and treats the produced water from Heglig oilfield and evaluates the possibility of the treated water for the re-using in water base fracturing fluids. Samples were collected from two different ponds in the field and analysed according to the American Public Health Association (APHA) and the results were compared with (National Recommended Water Quality (EPA)) to identify the required treatments for the collected water. The analysis was done in Rheine Waal University of Applied Science-Kamp-Lint fort-Germany. In this study, the effect of produced water from Heglig oil field on fluid formulation was studied as management processes of produced water prior to reuse for petroleum operation (Hydraulic Fracturing and Injection) or to be safe in environment. The pH effect on fluids viscosity was investigated for (6, 7, 8, 9 and 10). The results showed that the cross-linking ability of the fracturing fluid presented that better cross-linking system were achieved with 0.48 g CMHEC at pH of 8 and temperature of 40°C for HEC and 60°C CMHEC.